Power Supply Tester με LCD, KBS-498Α, 20/24 Pin 4 PSU ATX BTX ITX SATA HDD

Παράδοση 10+ ημέρες
004268
Τιμή σε πόντους:20 πόντοι
Κατασκευαστής: KBS, Εγγύηση: 1 Έτος
2000

Power Supply Tester με LCD, KBS-498Α, 20/24 Pin 4 PSU ATX BTX ITX SATA HDD

Άτοκες δόσεις!

Για αγορές από το κατάστημά μας άνω των 300€, μπορείτε να πληρώσετε έως 3 άτοκες δόσεις.

Αποστολές
  • Εντός Αττικής - €2.50 / 2 κιλά (+ 1.50 για κάθε επιπλέον κιλό)
  • Εκτός Αττικής - €3 / 2 κιλά (+ 1.50 για κάθε επιπλέον κιλό)
  • Ευρώπη από 41€ και πάνω βάση κιλών
  • Αμερική - Καναδάς από 46€ και πάνω βάση κιλών
  • Κύπρος από 21€ και πάνω βάση κιλών

 

Τρόποι πληρωμών
  • Με πιστωτική / Χρεωστική Κάρτα
  • Αντικαταβολή + 2.50€
  • Paypal
  • Τραπεζική κατάθεση
  • Πληρωμή στο κατάστημα
Γιατί εμάς
  • Εγγύηση σε όλα μας τα προϊόντα
  • Ενημέρωση πορείας παραγγελίας
  • Επιστροφές - Ακυρώσεις
  • Πολλοί τρόποι πληρωμών
  • Οι καλύτερες τιμές!
  • Η Διαθεσιμότητα των προϊόντων αλλάζει συνεχώς. Διαβάστε εδώ!
  • Voltage source : 20/24 pin ( ATX - connector )
  • Voltage test : +12V , -12V , +5V , -5V , +3.3V , +5V Stand by (SB) 12V power Good ( PG )
  • Connectors : Floppy, HDD , CDROM , SATA , 4pin ( P4 ) , 8pin ( Dual-CPU ) , 6pin ( PCI-Express )

Product Introduction:

  • The SD power supply tester is a robust voltage, tester for PC-power supply, ATX . BTX and ITX compliant, power supplies can be tested. LCD`s indicate the status of voltage .The PC / SPS is suitable for the ambitious hobby user , as well as for a quick functional check in specialized trade.
  • The methods of operation:
  • Plug power supply 24 PIN and P4 , P6 or P8 into the corresponding jack of the power test suite.
  • Power on the supply of power, will hear "DuDu" ring , if no flicker then the power supply output voltage is normal.
  • If a certain voltage signal was not detected, or the detected voltage value over the normal, will issue a "DuDu" long buzzer ; if the corresponding voltage value or PG flicker too, then the power is failed.
  • Διαστάσεις:12cm x 6cm
  • Color:Black

 

Οδηγίες:

  • Plug your 24-pin and 4-pin/6-pin/8-pin connector into the Digital PC Power Tester.
  • Turn on your power supply unit.
  • The LCD screen will display voltage and PG value. You will also hear two short beeps.
  • Check your SATA and Molex power output connectors one at a time by plugging each into the Digital PC Power Tester’s corresponding input connectors.
  • The LED will light up if the power output works. The LED will not light up if the power output does not work.
  • Note: Do not plug two peripheral power outputs (floppy, SATA, peripheral) into the Digital PC Power Tester at the same time.
  • After testing your power, turn off your power supply unit before removing any connectors.
Κατασκευαστής:
KBS
Εγγύηση:
1 Έτος
EAN:
kalemisbros-2080